Bulletproof Hitches MD20OFFSET Medium Duty Trailer Hitch Ball Mount

• Three Inch Steel Past Pin Hole To Completely Fill Receiver
• Powder Coated Finish
• 1/2 Inch Thick Full Length Gusset
• Corrosion Resistant Pins
• Easily Flip And Adjust In Seconds
• Extensively Tested And Exceed SAE-J684 Testing Requirements
• Limited Lifetime Warranty

Step 1
Measure the opening of the receiver tube (Figure A) to determine what size shank your vehicle requires. It will be 2", 2.5" or 3" (Please note that 3" is applicable to some 2017 & newer Ford Super Duty trucks and some RVs/Semis only)

Step 2
Park your vehicle on level ground and measure from the ground to the bottom inside of the receiver tube (Figure B), then take that measurement and apply it to the information below. As you can see in the example, this truck would require our 6" drop.

Receiver height as measured: